OnlyCuffsOnlyCuffsarchive search
The Forum at Handcuffs.Org

CHICAGO MODEL 1100

10 visible archived posts · 10 preserved total · topic ID 1273
Original topic ↗Recovered images
housecoatman 12 Apr 2006
#1
I just received a pair of Chicago Model 1100 Cuffs.
Paid $14.75 at Handcuff Warehouse. Didn't know that these were made in Taiwan till I got them or I probably wouldn't have ordered them.

I am very impressed with the action and the sleek design. In short... I really like them. They feel and look good. If they last as well as they look, Peerless and Smith / Wesson may take a lesson from the Taiwaneese.

I'm certainly not an expert nor claim to have any knowledge about handcuffs like some of you guys so your comments are welcome. Dump on me if you wish !

Ron Thorpe
Edri 12 Apr 2006
#2
They're sold under quite a few different names. The primary difference is that they would not have bothered to apply for NIJ approval . Mostly descent quality though. My biggest beef is that after a while the double locks don't work anymore , IE they don't prevent the bow from ratcheting in further.I've noticed this over several pair including some legirons from the same maker Often they have a serial number but no other markings. Oddly except for this defect I don't seeing them much worse than S&W or peerless. Put them next to a set of Hiatt 2050's though and you'll sure notice a difference. The difference in workmanship alone is incredible.

Edri
Edward 13 Apr 2006
#3
I just received a pair of Chicago Model 1100 Cuffs.
Paid $14.75 at Handcuff Warehouse. Didn't know that these were made in Taiwan till I got them or I probably wouldn't have ordered them.

I am very impressed with the action and the sleek design. In short... I really like them. They feel and look good. If they last as well as they look, Peerless and Smith / Wesson may take a lesson from the Taiwaneese.

I'm certainly not an expert nor claim to have any knowledge about handcuffs like some of you guys so your comments are welcome. Dump on me if you wish !

Ron Thorpe
Click to expand...
I WILL NOT carry any cuff that is not NIJ approved. One of my partners handcuffed an out of control person with the famous HWC stainless steel handcuffs. Which, I believe, is the same tiawan company that makes cuffs for most of these individual sellers like Galls, DHW, HWC, Etc. Well, the guy bent the jaw arm AND broke the cuff at the top swivel. We had to fight with this guy all over again. Once I snapped my trusty Hiatts 2010's on him, he was no longer out of control, nor did they break. This guy wound up being on PCP but it goes to show you, why take the chance? If you're a collecter, they're ok. If they are going to be used for duty, pay the extra $10 for a set of NIJ approved cuffs. Your life may depend on it.

Edward.
Larry Nevers 13 Apr 2006
#4
I just received a pair of Chicago Model 1100 Cuffs.
Paid $14.75 at Handcuff Warehouse. Didn't know that these were made in Taiwan till I got them or I probably wouldn't have ordered them.

I am very impressed with the action and the sleek design. In short... I really like them. They feel and look good. If they last as well as they look, Peerless and Smith / Wesson may take a lesson from the Taiwaneese.

I'm certainly not an expert nor claim to have any knowledge about handcuffs like some of you guys so your comments are welcome. Dump on me if you wish !

Ron Thorpe
Click to expand...
Edward, if you would learn to use your 6-cell Mag Light correctly, it doesn't matter if your cuffs are NIJ approved or not because by the time you cuff him, the cuffs are just for looks any way! And BTW, they are ALL on PCP!

Ron Thorpe 13 Apr 2006
#5
I just received a pair of Chicago Model 1100 Cuffs.
Paid $14.75 at Handcuff Warehouse. Didn't know that these were made in Taiwan till I got them or I probably wouldn't have ordered them.

I am very impressed with the action and the sleek design. In short... I really like them. They feel and look good. If they last as well as they look, Peerless and Smith / Wesson may take a lesson from the Taiwaneese.

I'm certainly not an expert nor claim to have any knowledge about handcuffs like some of you guys so your comments are welcome. Dump on me if you wish !

Ron Thorpe
Click to expand...
Hi and Thanks for the comments. I am beginning to see the light when it come to the Chicago 1100's.

I must get myself a set of HIATT 2010's. I really do like good workmanship.

I only just started collecting so I'm very much a novice. I was in security work most of my young life but never used handcuffs on anyone.
It sure is nice to hear from the experts. I live in Toronto Ontario and wonder what handcuffs the Metro Police are issued with. Does anyone know for sure. ??? What about the OPP (Ontario Provincial Police) ???

Thanks Guys. Nice to have a place to ask questions.
Steve Santini 13 Apr 2006
#6
I just received a pair of Chicago Model 1100 Cuffs.
Paid $14.75 at Handcuff Warehouse. Didn't know that these were made in Taiwan till I got them or I probably wouldn't have ordered them.

I am very impressed with the action and the sleek design. In short... I really like them. They feel and look good. If they last as well as they look, Peerless and Smith / Wesson may take a lesson from the Taiwaneese.

I'm certainly not an expert nor claim to have any knowledge about handcuffs like some of you guys so your comments are welcome. Dump on me if you wish !

Ron Thorpe
Click to expand...
Hi,

The T.O. cops carry a hodge podge of Peerless, Hiatt, and S&W cuffs.

O.P.P. and RCMP by and large all carry S&W.

Cheers, Steve Santini www.thedarkmaster.com
Edri 13 Apr 2006
#7
I just received a pair of Chicago Model 1100 Cuffs.
Paid $14.75 at Handcuff Warehouse. Didn't know that these were made in Taiwan till I got them or I probably wouldn't have ordered them.

I am very impressed with the action and the sleek design. In short... I really like them. They feel and look good. If they last as well as they look, Peerless and Smith / Wesson may take a lesson from the Taiwaneese.

I'm certainly not an expert nor claim to have any knowledge about handcuffs like some of you guys so your comments are welcome. Dump on me if you wish !

Ron Thorpe
Click to expand...
I'm not sure if they are issued or not, but the last OPP officer I saw were carrying peerless. My Brother is on Toronto Metro, and he carries peerless but I've never asked them if they were his own from his MP days or if they were issued.

Edri
Edward 14 Apr 2006
#8
I just received a pair of Chicago Model 1100 Cuffs.
Paid $14.75 at Handcuff Warehouse. Didn't know that these were made in Taiwan till I got them or I probably wouldn't have ordered them.

I am very impressed with the action and the sleek design. In short... I really like them. They feel and look good. If they last as well as they look, Peerless and Smith / Wesson may take a lesson from the Taiwaneese.

I'm certainly not an expert nor claim to have any knowledge about handcuffs like some of you guys so your comments are welcome. Dump on me if you wish !

Ron Thorpe
Click to expand...
Larry,

"Use your mag lite correctly", "cuffs are for looks", "they all are on PCP??"
I'm still trying to figure out if you're joking or serious. The last time I heard someone say something like that, was a wannabe cop, mall security guard. I do hope you were being funny & not serious.

Edward
JDB1979 14 Apr 2006
#9
I just received a pair of Chicago Model 1100 Cuffs.
Paid $14.75 at Handcuff Warehouse. Didn't know that these were made in Taiwan till I got them or I probably wouldn't have ordered them.

I am very impressed with the action and the sleek design. In short... I really like them. They feel and look good. If they last as well as they look, Peerless and Smith / Wesson may take a lesson from the Taiwaneese.

I'm certainly not an expert nor claim to have any knowledge about handcuffs like some of you guys so your comments are welcome. Dump on me if you wish !

Ron Thorpe
Click to expand...
Your flashlight is a weapon of necessity, not choice. At least that is what our flashlight defense course I had to go through told us. I know many cities have gone as far as to outlaw metal flashlights and issue the plastic Streamlite flashlights with an order; any one caught carrying a metal flashlight will be immediately terminated.

But a properly trained officer when put into a situation where it is needed or justified can really rely on his or her flashlight. It dose make a good weapon, just don't go boasting you love to use it or you will wind up in court way too often. There has even been riots due to officers using excessive use of force.

I don't know if that other guy was joking or not, but the first city I worked in, we had such a large dope problem that we had to go to extreme measures to control a subject without having to simply shoot him. The dope they were on was so powerful that pepper spray, stun gun, or asp would not even phase them. And it was a one-two man department with your closest back up 15-20 mins away. We ended up ordering some stuff not made or available in the U.S. from Mexico, needless to say it worked. I no longer work for that department and have moved on to another, but I do clearly see the need for flashlight training.

As far as being on PCP, it doesn’t mater what brand of handcuffs you’re using, a guy in Des Moines, Iowa, featured on the show COPS. Was strung out on PCP and managed to break a pair of Peerless 500, he ripped the swivel right out of the cuff, while cuffed behind his back, so NIJ doesn’t mean squat when it comes to that stuff.

As officers we get watched so closely by the public and criticized when the public feels that we may have went a little too far, but I don’t see our critics out there fight some one on PCP in hand to hand combat, or being put in a situation where you feel the other guy has a gun and is going to kill you. We as officers are faced with the reality that we may go to work one day and never come home. This, the public dose not consider when trying to get an officer fired because he or she had to use force. They don’t see all the murders, rapist, drugies, and gang members we deal with on a daily bases.

You can not judge a man till you walked a mile in his shoes.

James Brown
Larry Nevers 15 Apr 2006
#10
I just received a pair of Chicago Model 1100 Cuffs.
Paid $14.75 at Handcuff Warehouse. Didn't know that these were made in Taiwan till I got them or I probably wouldn't have ordered them.

I am very impressed with the action and the sleek design. In short... I really like them. They feel and look good. If they last as well as they look, Peerless and Smith / Wesson may take a lesson from the Taiwaneese.

I'm certainly not an expert nor claim to have any knowledge about handcuffs like some of you guys so your comments are welcome. Dump on me if you wish !

Ron Thorpe
Click to expand...
"One final Michigan Supreme Court case involves Detroit Police Officers Larry Nevers and Walter Budzyn, who were charged criminally after fighting with a drug suspect who subsequently died. At the request of the officers' local attorneys, we sought and received permission from the Michigan Supreme Court to file briefs on their behalf. This case was subsequently profiled on the television program 60 Minutes. On July 31, 1997, the Michigan Supreme Court granted a new trial for Walter Budzyn, but denied the appeal by Larry Nevers. Budzyn was immediately released from prison. He was retried, and on March 19, 1998, he was found guilty of involuntary manslaughter, and in January 1999 the Michigan Court of Appeals reinstated his 4 to 15 year prison sentence. (He has already served 4 years in prison and is eligible for parole.) Larry Nevers was successful on his appeal after a Federal court overturned the verdict, and was subsequently released. State prosecutors are currently appealing that decision."

Yes, I am serious.