OnlyCuffsOnlyCuffsarchive search
The Forum at Handcuffs.Org

I need magnets for fn herstal

7 visible archived posts · 7 preserved total · topic ID 4366
Original topic ↗Recovered images
handboeienfreak 14 Oct 2011
#1
Hi

I'm looking for some magnets for the fn herstal cuffs
after mark and sheila stop, i do not know where to get some

let me know what you've got or where to get one

thank you

best

patrick
IKMurray 14 Oct 2011
#2
Patrick; Don't know what size you need. Have only seen pics. of FN cuffs. But when all else fails for magnets, try your local Computer repair store and try to get a couple of NFG comuter hard drives. Each drives has 2 "rare earth magnets" that are 2-3 times stronger than a conventional ferrite magnet. A 2-1/2" (size) Laptop magnet should be ideal. the 3-1/2 desktop drive units have larger magnets. These little gems are very expensive to buy individually. Bad news..the drive units are held together with lots of small metric fasteners (usually) with TORX head cap screws, you will probably need T3, T5, T7, T8 +? TORX drivers, and maybe special Anti-Tamper screws, watch for the hidden screws under the labels. Best of luck; Ian (from Canada!)
Ian from Australia 14 Oct 2011
#3
Hi

I'm looking for some magnets for the fn herstal cuffs
after mark and sheila stop, i do not know where to get some

let me know what you've got or where to get one

thank you

best

patrick
Click to expand...
Hi, the keys sold by my US distributor were of my making, they are still available.

Ian
John Bushey 14 Oct 2011
#4
Hi

I'm looking for some magnets for the fn herstal cuffs
after mark and sheila stop, i do not know where to get some

let me know what you've got or where to get one

thank you

best

patrick
Click to expand...
Hi,
John Bushey here. I have Ian's supply of FN keys. I have several here, so drop me a line. John

I also have many keys in stock for other cuffs; Marlin, Bean Giant, Tower, Bean, Mattatuck, Muhlenfeld,
Plug 8's, Tower Bean, Stotz, Cavaney, H & R Supers, etc........... LOTS OF KEYS!
The only ones I'm limited on at present are the lost-wax cast keys Ian made; marlin, Tower Bean,
Plug 8, Rankin, Stotz. I also am doing Darby keys--but you must have the handcuff in possession to
assure the porper fit, so just send the cuff and I'll fit the key and return it.

John Bushey
Ian in America 16 Oct 2011
#5
Hi

I'm looking for some magnets for the fn herstal cuffs
after mark and sheila stop, i do not know where to get some

let me know what you've got or where to get one

thank you

best

patrick
Click to expand...
You'd be better off getting the keys from The Amazing Michael who prices will be better and at least they will work.
The Amazing Michael 16 Oct 2011
#6
Hi

I'm looking for some magnets for the fn herstal cuffs
after mark and sheila stop, i do not know where to get some

let me know what you've got or where to get one

thank you

best

patrick
Click to expand...
I just want everyone to know that I did not post the last comment. I don't know if that was a genuine compliment to my work or if someone is trying to stir up shit between Ian McColl and myself but trust me, there is enough shit stirred up between the two of us right now......we don't need any more. Thanks.

Cheers, Mike D~C/
handboeienfreak 23 Oct 2011
#7
Hi

I'm looking for some magnets for the fn herstal cuffs
after mark and sheila stop, i do not know where to get some

let me know what you've got or where to get one

thank you

best

patrick
Click to expand...
Hi John

I've sent a mail to you


best

patrick