I purchased a pair of Tower Double Lock cuffs with the three links and various dates stamped on one lock case and need to make a working key. I have a Tower key "blank" but I misplaced the information about the various possible notches that are cut in the key blank to make it work. Can someone post the diagram of the various key cuts? As I recall, the cuts are about 1/16 of a inch deep and 1/16th of an inch wide. Also, if anyone knows which key cut might be the most common for my cuffs that would help.
Thanks for any help anyone can provide.
Steve
joe tanner 09 Apr 2012
#299% of the time, the key does NOT even need a bit cut... joe
Ian McColl 10 Apr 2012
#3I purchased a pair of Tower Double Lock cuffs with the three links and various dates stamped on one lock case and need to make a working key. I have a Tower key "blank" but I misplaced the information about the various possible notches that are cut in the key blank to make it work. Can someone post the diagram of the various key cuts? As I recall, the cuts are about 1/16 of a inch deep and 1/16th of an inch wide. Also, if anyone knows which key cut might be the most common for my cuffs that would help.
Thanks for any help anyone can provide.
Steve
Steve, email me directly and I will send you my diagram, I won't post here as some people abuse copyright.
