Czech prison handcuffs for sale

Hello,

I have 4 pairs of old Czech prison handcuffs for sale, they are heavy, robust with a big hands openings. They use gears instead of exposed pawls so they are virtually shim-proof; no double locking function.

I

The 3rd (?) generation model – generally bluing is in good condition but there is some abrasion of coating – mostly in upper parts of cheek plates. Besides this, there is very little sign of rust in millings and grooves of rotating arms and in hinges area. The internal mechanism is free of rust.
Fully functional; one of pawl spring works slightly tougher than the other.
One fitting key included.

250$








I gen (?) models with no grooves in rotating arms:

II

Cuffs have little scratches on the front and slightly bigger on the back surface of lock cases and near keyholes. There is some rust on the inside of locks, cogs, between cheek plates and on one end of hinges; rust spots on the inside surface of rotating arms. One of rotating arms will turn a bit harder on the upper part of revolution (it's not because of binding against the cheek plate).
One original key included.

200$








III

There are some losses of coating in hinges area, near keyholes, on sides of lock cases and on rotating arms. Dimples on one side of the lock case from hitting it with some pointed object. Moderate rust on the inside of lock cases, cheek plates, rust spot in rotating arms' millings. One of rotating arms rubs against the cheek plate so it needs slightly bigger effort to turn.
One org. key included.

190$







IV

Black abrasions on the back surface of lock cases, on cheek plates and rotating arms. There is very little rust on the inside of locks, between cheek plates and one end of hinges. Some rust on rotating arms. Other than the previous two, both rotating arms turn without any binding:)
One org. key included.

190$










Payment can be made via PayPal or on my bank account (SEPA is welcomed).

I ship worldwide from Poland and the cost of priority package is approx. 8$.

If you have any further questions or want some additional photos, please send me an email at:
parabellum.org at gmail.com

Piotr

Is this offer actual?

Hello,

I have 4 pairs of old Czech prison handcuffs for sale, they are heavy, robust with a big hands openings. They use gears instead of exposed pawls so they are virtually shim-proof; no double locking function.

I

The 3rd (?) generation model – generally bluing is in good condition but there is some abrasion of coating – mostly in upper parts of cheek plates. Besides this, there is very little sign of rust in millings and grooves of rotating arms and in hinges area. The internal mechanism is free of rust.
Fully functional; one of pawl spring works slightly tougher than the other.
One fitting key included.

250$








I gen (?) models with no grooves in rotating arms:

II

Cuffs have little scratches on the front and slightly bigger on the back surface of lock cases and near keyholes. There is some rust on the inside of locks, cogs, between cheek plates and on one end of hinges; rust spots on the inside surface of rotating arms. One of rotating arms will turn a bit harder on the upper part of revolution (it's not because of binding against the cheek plate).
One original key included.

200$








III

There are some losses of coating in hinges area, near keyholes, on sides of lock cases and on rotating arms. Dimples on one side of the lock case from hitting it with some pointed object. Moderate rust on the inside of lock cases, cheek plates, rust spot in rotating arms' millings. One of rotating arms rubs against the cheek plate so it needs slightly bigger effort to turn.
One org. key included.

190$







IV

Black abrasions on the back surface of lock cases, on cheek plates and rotating arms. There is very little rust on the inside of locks, between cheek plates and one end of hinges. Some rust on rotating arms. Other than the previous two, both rotating arms turn without any binding:)
One org. key included.

190$










Payment can be made via PayPal or on my bank account (SEPA is welcomed).

I ship worldwide from Poland and the cost of priority package is approx. 8$.

If you have any further questions or want some additional photos, please send me an email at:
parabellum.org at gmail.com

Piotr

Click to expand...

Yes, all 4 pairs are still available for sale.

Hello,

I have 4 pairs of old Czech prison handcuffs for sale, they are heavy, robust with a big hands openings. They use gears instead of exposed pawls so they are virtually shim-proof; no double locking function.

I

The 3rd (?) generation model – generally bluing is in good condition but there is some abrasion of coating – mostly in upper parts of cheek plates. Besides this, there is very little sign of rust in millings and grooves of rotating arms and in hinges area. The internal mechanism is free of rust.
Fully functional; one of pawl spring works slightly tougher than the other.
One fitting key included.

250$








I gen (?) models with no grooves in rotating arms:

II

Cuffs have little scratches on the front and slightly bigger on the back surface of lock cases and near keyholes. There is some rust on the inside of locks, cogs, between cheek plates and on one end of hinges; rust spots on the inside surface of rotating arms. One of rotating arms will turn a bit harder on the upper part of revolution (it's not because of binding against the cheek plate).
One original key included.

200$








III

There are some losses of coating in hinges area, near keyholes, on sides of lock cases and on rotating arms. Dimples on one side of the lock case from hitting it with some pointed object. Moderate rust on the inside of lock cases, cheek plates, rust spot in rotating arms' millings. One of rotating arms rubs against the cheek plate so it needs slightly bigger effort to turn.
One org. key included.

190$







IV

Black abrasions on the back surface of lock cases, on cheek plates and rotating arms. There is very little rust on the inside of locks, between cheek plates and one end of hinges. Some rust on rotating arms. Other than the previous two, both rotating arms turn without any binding:)
One org. key included.

190$










Payment can be made via PayPal or on my bank account (SEPA is welcomed).

I ship worldwide from Poland and the cost of priority package is approx. 8$.

If you have any further questions or want some additional photos, please send me an email at:
parabellum.org at gmail.com

Piotr

Click to expand...

I have sent mail to you but no response. My mail is rasberius (at) gmail.com

Hello,

I have 4 pairs of old Czech prison handcuffs for sale, they are heavy, robust with a big hands openings. They use gears instead of exposed pawls so they are virtually shim-proof; no double locking function.

I

The 3rd (?) generation model – generally bluing is in good condition but there is some abrasion of coating – mostly in upper parts of cheek plates. Besides this, there is very little sign of rust in millings and grooves of rotating arms and in hinges area. The internal mechanism is free of rust.
Fully functional; one of pawl spring works slightly tougher than the other.
One fitting key included.

250$








I gen (?) models with no grooves in rotating arms:

II

Cuffs have little scratches on the front and slightly bigger on the back surface of lock cases and near keyholes. There is some rust on the inside of locks, cogs, between cheek plates and on one end of hinges; rust spots on the inside surface of rotating arms. One of rotating arms will turn a bit harder on the upper part of revolution (it's not because of binding against the cheek plate).
One original key included.

200$








III

There are some losses of coating in hinges area, near keyholes, on sides of lock cases and on rotating arms. Dimples on one side of the lock case from hitting it with some pointed object. Moderate rust on the inside of lock cases, cheek plates, rust spot in rotating arms' millings. One of rotating arms rubs against the cheek plate so it needs slightly bigger effort to turn.
One org. key included.

190$







IV

Black abrasions on the back surface of lock cases, on cheek plates and rotating arms. There is very little rust on the inside of locks, between cheek plates and one end of hinges. Some rust on rotating arms. Other than the previous two, both rotating arms turn without any binding:)
One org. key included.

190$










Payment can be made via PayPal or on my bank account (SEPA is welcomed).

I ship worldwide from Poland and the cost of priority package is approx. 8$.

If you have any further questions or want some additional photos, please send me an email at:
parabellum.org at gmail.com

Piotr

Click to expand...

Hi all,

cuffs no. II are sold; I, III and IV are still available for sale.


I haven't been on the forum for a while but just by way of little explanation I responded all the emails in September but didn't post about it here.

Piotr

Hello,

I have 4 pairs of old Czech prison handcuffs for sale, they are heavy, robust with a big hands openings. They use gears instead of exposed pawls so they are virtually shim-proof; no double locking function.

I

The 3rd (?) generation model – generally bluing is in good condition but there is some abrasion of coating – mostly in upper parts of cheek plates. Besides this, there is very little sign of rust in millings and grooves of rotating arms and in hinges area. The internal mechanism is free of rust.
Fully functional; one of pawl spring works slightly tougher than the other.
One fitting key included.

250$








I gen (?) models with no grooves in rotating arms:

II

Cuffs have little scratches on the front and slightly bigger on the back surface of lock cases and near keyholes. There is some rust on the inside of locks, cogs, between cheek plates and on one end of hinges; rust spots on the inside surface of rotating arms. One of rotating arms will turn a bit harder on the upper part of revolution (it's not because of binding against the cheek plate).
One original key included.

200$








III

There are some losses of coating in hinges area, near keyholes, on sides of lock cases and on rotating arms. Dimples on one side of the lock case from hitting it with some pointed object. Moderate rust on the inside of lock cases, cheek plates, rust spot in rotating arms' millings. One of rotating arms rubs against the cheek plate so it needs slightly bigger effort to turn.
One org. key included.

190$







IV

Black abrasions on the back surface of lock cases, on cheek plates and rotating arms. There is very little rust on the inside of locks, between cheek plates and one end of hinges. Some rust on rotating arms. Other than the previous two, both rotating arms turn without any binding:)
One org. key included.

190$










Payment can be made via PayPal or on my bank account (SEPA is welcomed).

I ship worldwide from Poland and the cost of priority package is approx. 8$.

If you have any further questions or want some additional photos, please send me an email at:
parabellum.org at gmail.com

Piotr

Click to expand...

Since the example #2 has been sold, I will offer mine for sale to any who missed the original Piotr sale.
Mine is very similar in appearance and condition. This comes with an original key as pictured.
I will send pics to you if requested.
Photobucket seems to be having problems right now. I would have posted in a different blog but since I can't post any pictures, I will mention this sale.



markalyons@hotmail.com

O--O

Hello,

I have 4 pairs of old Czech prison handcuffs for sale, they are heavy, robust with a big hands openings. They use gears instead of exposed pawls so they are virtually shim-proof; no double locking function.

I

The 3rd (?) generation model – generally bluing is in good condition but there is some abrasion of coating – mostly in upper parts of cheek plates. Besides this, there is very little sign of rust in millings and grooves of rotating arms and in hinges area. The internal mechanism is free of rust.
Fully functional; one of pawl spring works slightly tougher than the other.
One fitting key included.

250$








I gen (?) models with no grooves in rotating arms:

II

Cuffs have little scratches on the front and slightly bigger on the back surface of lock cases and near keyholes. There is some rust on the inside of locks, cogs, between cheek plates and on one end of hinges; rust spots on the inside surface of rotating arms. One of rotating arms will turn a bit harder on the upper part of revolution (it's not because of binding against the cheek plate).
One original key included.

200$








III

There are some losses of coating in hinges area, near keyholes, on sides of lock cases and on rotating arms. Dimples on one side of the lock case from hitting it with some pointed object. Moderate rust on the inside of lock cases, cheek plates, rust spot in rotating arms' millings. One of rotating arms rubs against the cheek plate so it needs slightly bigger effort to turn.
One org. key included.

190$







IV

Black abrasions on the back surface of lock cases, on cheek plates and rotating arms. There is very little rust on the inside of locks, between cheek plates and one end of hinges. Some rust on rotating arms. Other than the previous two, both rotating arms turn without any binding:)
One org. key included.

190$










Payment can be made via PayPal or on my bank account (SEPA is welcomed).

I ship worldwide from Poland and the cost of priority package is approx. 8$.

If you have any further questions or want some additional photos, please send me an email at:
parabellum.org at gmail.com

Piotr

Click to expand...

Hi,

little price drop for the New Year:

I - 210$
III - 150$
IV - 150$

Regards,
Piotr

Hello,

I have 4 pairs of old Czech prison handcuffs for sale, they are heavy, robust with a big hands openings. They use gears instead of exposed pawls so they are virtually shim-proof; no double locking function.

I

The 3rd (?) generation model – generally bluing is in good condition but there is some abrasion of coating – mostly in upper parts of cheek plates. Besides this, there is very little sign of rust in millings and grooves of rotating arms and in hinges area. The internal mechanism is free of rust.
Fully functional; one of pawl spring works slightly tougher than the other.
One fitting key included.

250$








I gen (?) models with no grooves in rotating arms:

II

Cuffs have little scratches on the front and slightly bigger on the back surface of lock cases and near keyholes. There is some rust on the inside of locks, cogs, between cheek plates and on one end of hinges; rust spots on the inside surface of rotating arms. One of rotating arms will turn a bit harder on the upper part of revolution (it's not because of binding against the cheek plate).
One original key included.

200$








III

There are some losses of coating in hinges area, near keyholes, on sides of lock cases and on rotating arms. Dimples on one side of the lock case from hitting it with some pointed object. Moderate rust on the inside of lock cases, cheek plates, rust spot in rotating arms' millings. One of rotating arms rubs against the cheek plate so it needs slightly bigger effort to turn.
One org. key included.

190$







IV

Black abrasions on the back surface of lock cases, on cheek plates and rotating arms. There is very little rust on the inside of locks, between cheek plates and one end of hinges. Some rust on rotating arms. Other than the previous two, both rotating arms turn without any binding:)
One org. key included.

190$










Payment can be made via PayPal or on my bank account (SEPA is welcomed).

I ship worldwide from Poland and the cost of priority package is approx. 8$.

If you have any further questions or want some additional photos, please send me an email at:
parabellum.org at gmail.com

Piotr

Click to expand...

Hi,

another price change: I - 150$; III - 100$; IV - 100$

Piotr